Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
•
The start times and cycle duration are maintained during
OFF or RUN mode.
•
The dial must remain in RUN position for the cycle to run.
If the dial is turned to any other position, watering will stop.
•
Rain drops will be shown when the watering is on, on the
corresponding valve.
SET RAIN DELAY (WATERING DELAY):
•
With the dial in the RUN position, pressing (+) will cause
a 24 hour delay to the program.
•
Same delay will occur on both Left and Right valves.
•
Delays of 0, 24, 48 hours, and 72 hours are possible. Delay
time can be changed by pushing + or - at any time.
•
Display will flash between clock and hours remaining
before programmed cycle resumes.
•
To remove Watering delay, turn dial to OFF and then
back to RUN or reduce the delay time to 0.
MANUAL (INSTANT) WATERING
•
To water instantly without interrupting the set cycle, press
the
button to start watering.
•
This mode will function only when the dial is on RUN position
•
Choose Left or Right valve (Valves can have different
watering duration set)
•
Press the + or - button to adjust from 0 to 240 minutes
at any time.
4
Publicidad
Tabla de contenido
