Eaton Converge Serie Instrucciones Para La Instalación página 3

1
Remote box
Mud-in Flange
(c)
Electrical Cover
(a) Trim Cover
Remove Remote box from packaging and disassemble assembly: (a) Remove the trim cover
from the remote box housing. (b) Disconnect the ground strap's quick disconnect. (c) Next
remove the screws attaching the electrical cover to the remote box housing. Set hardware
aside in a safe place.
2
50.000
[1270.00]
[660.40]
Cut rough opening in sheet rock for remote box install. See dimensions above.
3
Drill 9/64 holes into channel of mud flange. Add additional holes
every foot along length.
3
EATON
IL524011EN
(b)
Ground Strap
4.000
[101.60]
26.000 4.000
[101.60]
Drill hole in provided
channel Using a
9/64th drill bit
Installation instructions
(c)
(b)
Quick Disconnect
4 ft box
2 ft box