SETTING THE REFERENCE TIME
Note
The reference time shown must be the same as the visible current time. Therefore, it must
be corrected if the current time is changed. Afterward, the alarm should be set again.
* In order to set the time to the "approximate second", crown
when the second hand is in the "60" position.
Crown
should be pushed back into position I at the "approximate second" (based on
4
a radio signal, a watch controlled by radio, etc.).
30
must be pulled out
1
Type of battery: 395 (Ø 9.5 mm x 2.6 mm / SR 927 SW)
Accuracy of functioning: +20/-10 seconds per month