Service Access - Jacuzzi Whirlpool Bath BUILDER Serie Manual De Instalación Y Operación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

If an optional skirt is used on a corner bath, additional support is
necessary in the front of the unit. Measure the height from the floor to
the underside of the bath rim. Cut two 2" x 4" studs, apply adhesive
to both ends and install (see roughing in reference).
SUPPORT FOR CORNER BATHS
APPLY
ADHESIVE
2" x 4" STUD
INTEGRAL SKIRT MOUNTING DETAIL
FINISHING
MATERIALS
CAULKING BEAD
SKIRT
PANEL
U FRAME SKIRT MOUNTING DETAIL
FINISHING MATERIALS
SECURE SHELL CLIP
UNDER CENTER
BATH RIM
FILLER (Optional)
SKIRT
PANEL
SECURE BOTTOM OF FRAME TO FLOOR

Service Access

For partially or fully sunken installations, allow for access to ser-
vice connections. It is the installer's responsibility to provide suffi-
cient service access. The recommended minimum dimensions al-
lowable for service to the bath are shown in the "Service Access"
illustration.
Provide adequate ventilation (minimum 30 square inch opening)
for cooling the motor and to supply sufficient air for the jets.
SERVICE ACCESS
H
PREFERRED
ACCESS
Service Access with Skirt
An optional skirt fits along the side of the bath for above-floor in-
stallations and is also an access panel for servicing. Allow a space of
at least 8 inches away from the bath for skirt removal.
The skirt is designed to accommodate the added height of the tile,
linoleum, or other floor coverings up to 1-1/4 inches above the floor,
and will be flush with the floor when installed.
More detailed instructions on skirt installation are provided with
the optional skirt assembly.
SERVICE ACCESS
18"
RIGHT HAND UNIT SHOWN
A - Preferred access
CAULKING
B - Acceptable alternative if access A is not possible
BEAD
C - Optional access for accessory equipment
NOTE: Left hand unit access is on the opposite
Service Access with Integral Skirt
SKIRT
Service access is through the removable skirt panels.
FRAME
SERVICE ACCESS
REMOVABLE SKIRT
ACCESS PANELS
13
(WITHOUT SKIRT)
12"
ALTERNATE ACCESS
18"
(PREFERRED ACCESS
MITO 5, 6 & FRESCO)
(CORNER BATHS)
C
A
36"
side (mirror Image).
(WITH INTEGRAL SKIRT)
ACCESS AREA
MOTOR
12"
18"
20"
B
24"
MOTOR

Publicidad

Tabla de contenido
loading

Productos relacionados para Jacuzzi Whirlpool Bath BUILDER Serie

Tabla de contenido