WARNING:
Use of this product can create
dust containing chemicals which may cause
respiratory or other illnesses. Some examples of
these chemicals are compounds found in pes-
ticides, insecticides, fertilizers and herbicides.
Your risk from these exposures varies, depend-
ing on how often you do this type of work. To
reduce your exposure to these chemicals: work
in a well ventilated area, and work with approved
safety equipment, such as those dust masks that
are specially designed to filter out microscopic
particles.
PARTS DESCRIPTION
Power brush attachment
1
7
6
5
► 1 . Cap 2. Pipe 3. Protector 4. Clip 5. Brush 6. Gear
case 7. Hexalobular wrench
Power sweep attachment
1
7
6
5
► 1 . Cap 2. Pipe 3. Protector 4. Clip 5. Sweep drum
6. Gear case 7. Hexalobular wrench
2
3
4
2
4
3
6 ENGLISH
ASSEMBLY
WARNING:
Before assembling or adjusting the
equipment, switch off the motor or engine and remove the
spark plug cap or battery cartridge. Otherwise the brushes,
drums, or other parts may move and result in serious injury.
WARNING:
When assembling or adjusting the
equipment, always put it down. Assembling or adjusting the
equipment in an upright position may result in serious injury.
WARNING:
Follow the warnings and precau-
tions in the chapter "SAFETY WARNINGS" and
the instruction manual of the power unit.
Assembling the attachment
1.
Remove the clip from the brush or sweep drum on
the left side of the brush unit or sweep drum unit, and
then remove the brush or sweep drum.
► 1 . Brush 2. Clip
2.
Loosen 3 screws on the gear case.
► 1 . Screw 2. Gear case
1
2
1
2