Alcad PDK-42400 Manual Del Usuario página 8

VIDEOPORTERO DIGITAL -
Configure one of the entrance panels as the main panel
will be activated when the auto switch-on function is used from the monitor. Configure the remaining panels as secondary panels
"Configuration of the secondary entrance panel (S)", page 28).
The function activating the electric lock from the entrance panels remains enabled at all times.
SYSTEM ON STANDBY
The monitors are inactive (communication with the entrance panel and door opening functions are disabled). If the handset of a monitor is lifted,
an uninterrupted tone will be heard. It is possible to activate the monitor's auto switch-on system.
SYSTEM ACTIVE. MAKING A CALL
Only the monitor whose code is identical to the code which has been entered will receive the call. Confirmation of the call on the entrance panel.
The call tone will be different for calls from the main entrance panel and calls from other the other panel.
If the handset of another monitor is lifted, intermittent tones will be heard and the auto switch-on function will not operate. If the handset of the
requested monitor is off the hook or if the code does not correspond to any monitor, the panel will emit intermittent tones. When several monitors
are installed in the dwelling, all of them receive the call. The first monitor to be answered will establish communication with the the entrance panel.
Time setting to answer: Configurable (Position 7 from the configuration menu).
Maximum time setting for conversation: Configurable (Position 6 from the configuration menu).
During both these periods of time, the entrance panel display will show the code which has been entered. The other panels will be deactivated
(blocked). The display of these panels will show how much longer the panels will remain blocked.
27)
).(s)
STANDBY
.
,
).
(
,
.
.
,
,
,
:
,
(See "Configuration of the main entrance panel (P)", page 27) This entrance panel
( ). (
(s), ( .
.
.
,
( 7
:
. 28
,
.
.
).
( 6
.
(See
( ) .
.
).
.
,
,
.
.