The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or
applied with impact. Be careful not to be injured by broken glass pieces in case the LCD panel breaks.
The LCD panel is a very high technology product with 921,600 thin film transistors, giving you fine picture
details. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red.
Please note that this does not affect the performance of your product.
LOCATION
For safe operation and satisfactory performance of
your TV, keep the following in mind when selecting
a place for its installation:
Place your TV in a room with adequate ventilation.
●
●
Keep your TV set away from sources of direct
heat, such as heat registers or direct sunlight.
Do not place your TV on soft surfaces, such as
●
rugs or blankets.
Leave enough room for air to circulate around the
●
bottom, top and back of the TV set.
To prevent fire, never place any type of candle or
●
flames on the top or near the TV set.
●
To prevent fire or shock hazard, do not expose this
product to dripping or splashing. No objects filled
with liquids, such as vases, should be placed on
the product.
CABINET CLEANING
Wipe the front panel and other exterior surfaces
●
of the TV with a soft cloth immersed in
lukewarm water and wrung dry.
Never use a solvent or alcohol. Do not spray
●
insecticide liquid near the TV. Such chemicals
may cause damage and discoloration to the
exposed surfaces.
Remote control unit
(NE308UD)
Batteries ("AA" x 2)
PRECAUTIONS
MAINTENANCE
SUPPLIED ACCESSORIES
TV
POWER
INPUT
SELECT DISPLAY
SLEEP
1
2
3
4
5
6
7
8
9
MENU
0
+100
MUTE
CH RETURN
VOL
CH
- 4 -
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE SLOT
AND FULLY INSERT.
FCC WARNING- This equipment may generate
or use radio frequency energy. Changes or
modifications to this equipment may cause
harmful interference unless the modifications are
expressly approved in the instruction manual.
The user could lose the authority to operate this
equipment if an unauthorized change or
modification is made.
This product utilizes tin-lead solder, and fluorescent lamp
containing a small amount of mercury. Disposal of these
materials may be regulated due to environmental consid-
erations. For disposal or recycling information, please
contact your local authorities or the Electronic Industries
Alliance: www.eia.org
PICTURE SCREEN CLEANING
If the liquid crystal display panel should require
cleaning, wipe it with a cotton or soft cloth. Before
cleaning the picture screen, disconnect the power
cord.
Owner's Manual
(1EMN20182)
EN