Installation - Home Decorators Collection SBAR01 Guía De Uso Y Cuidado

Installation

1
Installing/Replacing AAA Remote
Control Batteries
WARNING: Always dispose of used batteries properly,
including keeping them away from children. Even used cells
may cause injury.
□ To remove the battery cover, press in at the top and slide it
down and off the remote control.
□ Install batteries (D) according to the polarity indicators.
NOTE: Do not mix old and new batteries. Do not mix
alkaline, standard (carbon-zinc), or rechargeable (nickel-
cadmium) batteries.
□ Reinstall the battery cover, making sure it is secure before
use.
□ Do not use the remote control (A) without the battery cover
installed.
NOTE: Remove the batteries for storage when the remote
control will not be used for long periods of time.
2
Installing the Remote Control Wall
Bracket
To mount the remote control wall bracket (B):
□ Remove the screw cover from the remote control wall
bracket (B).
□ Install the remote control wall bracket (B) in the desired
location using the two mounting screws provided (C).
□ Replace the screw cover to cover the screw heads.
Make sure the remote is mounted high
CAUTION:
enough to prevent unauthorized activation of the
shades. It should be placed at least 5 feet above the
floor so that it is inaccessible to children.
A
B
4
D
C