SuperTrak EX4350 Quick Start Guide
Step 2: Install the SuperTrak EX4350 Card
The SuperTrak EX4350 card fits into any available 3.3-volt PCI-Express X4 slot.
You can also plug the SuperTrak card into a PCI-Express X8 or X16 slot.
1.
Remove the cover of your system.
2.
Remove the inside slot cover of an available PCI-Express slot on the
motherboard.
3.
Install the SuperTrak card into the open slot (see above).
4.
Fasten the SuperTrak card bracket to the system case (see above).
The SuperTrak EX4350 RAID Controller card is a PCI Plug-n-Play
(PnP) device. No changes are necessary in the motherboard
CMOS/BIOS Setup for resources or drive types in most
applications.
Note
4