Technical Specifications; Package Contents - Parkside PDSS C3 Instrucciones De Funcionamiento

Technical specifications

 
Working pressure:
Compressed
air quality:
Volumetric flow rate:
Tyre inflator
Air blow gun
A-weighted sound
pressure level (Lpa):
Air blow gun:
A-weighted sound
power level (Lwa):
Uncertainty:
Measured value determined according to
EN 14462 (EN1953:2013).

Package contents

 
1 pneumatic tyre inflator with pressure gauge
1 pneumatic air blow gun
2 extension nozzles
1 adapter set (8-piece)
1 set of operating instructions
  S afety instructions for
pneumatic tools
PLEASE READ THROUGH
THE OPERATING
INSTRUCTIONS CAREFULLY BEFORE
USE. THESE FORM PART OF THE
PRODUCT AND MUST BE AVAILABLE
AT ALL TIMES!
292180 Druckluft-Einstiegs-Zubehoer-Set_content_LB8.indb 15
Introduction/Safety instructions for pneumatic tools
max. 8 bar
clean, oil-free and
moisture-free
40–70 l/min
70–130 l/min
Tyre inflator: 84 dB(A)
87.7 dB(A)
Tyre 95
inflator: dB(A)
Air blow 98.7
gun: dB(A)
K = 3 dB(A)
When pneumatic
tools are used, basic safety precau-
tions must be taken in order to avoid
the risk of fire, electric shock or
personal injury. Before first using the
product, please ensure you read and
follow these operating instructions in
full and keep them in a safe place.
The manufacturer accepts no liability
for losses, damage or personal injury
caused by a failure to follow these
operating instructions.
The dangers stated
are foreseeable when using handheld
pneumatic equipment for general-
purpose work. However, users must
themselves consider the risks that can
occur when using the equipment for
a specific application.
DANGER OF
INJURY!
Switch off the compressed air supply
before changing tools and settings or
performing maintenance.
EXPLOSION
HAZARD!
Never use petrol or other
„ 
flammable liquids to clean the
pneumatic device! Residual fumes
in the pneumatic device could be
ignited by sparks and cause the
pneumatic device to explode.
15
EN
28.11.17 14:16