Publicidad
Idiomas disponibles
Idiomas disponibles
Additional safety warnings
Observe the corresponding operating manuals of the re-
spective compressed air tools / compressed air attach-
ments! The following general warnings must also be observed.
Safety warnings for working with compressed air and
blasting guns
• Ensure there is sufficient distance to the product, at least 2.50 m, and
keep the compressed air tools / compressed air attachments away from
the compressor during operation.
• The compressor pump and lines can become very hot during operation.
Touching these parts will burn you.
• The air which is sucked in by the compressor must be kept free of impuri-
ties that could cause fires or explosions in the compressor pump.
• When releasing the hose coupling, hold the hose coupling piece with
your hand. This way, you can protect yourself against injury from the
rebounding hose.
• Wear safety goggles and a respirator when working with the com-
pressed air pistol. Dusts are harmful to health! Injuries can be easily
caused by foreign objects and blown away parts.
• Do not blow at people with the blow-out pistol and do not clean clothes
while being worn. Danger of injury!
Safety warnings when using spraying attachments (e. g.
paint sprayers)
• Keep the spray attachment away from the compressor when filling so that
no liquid comes into contact with the compressor.
• Never spray in the direction of the compressor when using the spray-
ing attachments (e.g. paint sprayers). Moisture can lead to electrical
hazards!
• Do not process any paints or solvents with a flash point below 55 °C.
Risk of explosion!
• Do not heat up paints or solvents. Risk of explosion!
• If hazardous liquids are processed, wear protective filter units (face
guards). Also, adhere to the safety information provided by the manu-
facturers of such liquids.
• The details and designations of the Ordinance on Hazardous Sub-
stances, which are displayed on the outer packaging of the processed
material, must be observed. Additional protective measures are to be
undertaken if necessary, particularly the wearing of suitable clothing
and masks.
• Do not smoke during the spraying process and/or in the work area. Risk
of explosion! Paint vapours are easily combustible.
• Never set up or operate the equipment in the vicinity of a fire place,
open lights or sparking machines.
• Do not store or eat food and drink in the work area. Paint vapours are
harmful to your health.
• The work area must exceed 30 m³ and sufficient ventilation must be
ensured during spraying and drying.
• Do not spray against the wind. Always adhere to the regulations of the
local police authority when spraying combustible or hazardous materi-
als.
• Do not process media such as white spirit, butyl alcohol and methylene
chloride with the PVC pressure hose. These media will destroy the pres-
sure hose.
• The work area must be separated from the compressor so that it cannot
come into direct contact with the working medium.
Operation of pressure vessels
• Anyone who operates a pressure vessel must keep this in good working
order, operate and monitor it correctly, perform the necessary mainte-
nance and servicing works immediately and implement safety measures
as required according to the circumstances.
• The regulatory authority can instruct necessary monitoring measures in
individual cases.
• A pressure vessel must not be operated if it exhibits a defect that poses
a danger to personnel or third parties.
• Check the pressure vessel for rust and damage each time before use.
The compressor shall not be operated if the pressure vessel is damaged
or rusty. If you discover damage, please contact the customer service
workshop.
Keep these safety instructions in a safe place.
Residual risks
Comply with the stipulated maintenance and safety instructions in the op-
erating instructions.
Remain attentive at all times when working, and keep third parties at a safe
distance from your work area.
Even when the device is being used properly, there will always be certain
residual hazards that cannot be completely ruled out. The following poten-
tial hazards can arise due to the type and design of the device:
• Unintentional starting up of the product.
• Damage to hearing if the stipulated hearing protection is not worn.
• Dirt particles, dust etc. can get irritate the eyes or face despite wearing
safety goggles.
• Inhaling swirled up particles.
7. Technical data
Mains connection ....................................................................230 V∼ 50 Hz
Motor power .....................................................................................1100 W
Operating mode .......................................................................................... S1
Compressor speed ..........................................................................2850 rpm
Pressure vessel capacity .............................................................approx. 24 l
Operating pressure .................................................................. approx. 8 bar
Theo. intake capacity ....................................................... approx. 213 l/min
Effective delivery quantity at 7 bar ....................................approx. 85 l/min
Effective delivery quantity at 4 bar ................................. approx. 117 l/min
Effective delivery quantity at 1 bar ................................. approx. 149 l/min
Sound pressure level L
....................................................................... 69 dB
PA
Sound power level L
.......................................................................... 87 dB
WA
Uncertainty K
/
...................................................................................3 dB
PA
WA
Protection category .................................................................................. IP20
Device weight ....................................................................... approx. 21.5 kg
Max. altitude (above mean sea level) .............................................. 1000 m
The noise emission values have been determined in accordance with EN
ISO 3744:1995.
Wear hearing protection.
Excessive noise can result in a loss of hearing.
8. Before commissioning
• Open the packaging and carefully remove the device.
• Remove the packaging material, packaging and transport safety de-
vices (if applicable).
GB/IE/NI/CY/MT
5
Publicidad
