Sam G-10 Instrucciones página 2

ENGLISH 1
1.- INSTALLATION
1.1. RECOMMENDATIONS:
For its correct functioning, the machine requires a dry atmosphere and away from heat
sources.
Make sure that the machine accepts the local voltage checking the SPECIFICATIONS
PLATE (PICTURE 6), at the bottom of the machine, by the switch. Connect the machine to
a plug with earth wire to avoid electrical discharges.
1.2. ASSEMBLY OF THE CONTROL MODULE AND START:
The controls module is delivered in a box inside the cabinet.
Before starting the machine:
1. pass the cable of the module through the hole.
2. insert the upper flap first
3. insert the bottom flap second.
4. close the inside bolt.
5. connect the module.
6. switch the machine on.
1.3. START UP:
Switch the machine ON and wait for the display on the CONTROL MODULE to turn on.
The machine is ready to work with the default values. If you want to change them, access
the TEST MODE (SECTION 4).
Check the counters, motors and sensors (TEST MODE - SECTION 4).
Go back to the PLAY MODE and put a coin to check that the game starts. Check that the
machine delivers a prize before the game ends.