Measurement Operation - Beta 1760/IR500 Instrucciones

8. Measurement Operation

1) Hold the meter by its Handle Grip and point lt toward the surface to be
measured.
2) Pull and hold the trigger to turn the meter on and begin testing. The
display will light if the battery is in good condltion. Replace the battery if
the display does not light.
3) Release the Trigger and the HOLD display icon will appear on the
LCD indicating that the reading is boing hold. In HOLD status, press the
laser/ Backlight button
to turn on or turn off the laser. And press the Laser/ Backlight to turn on
or turn off the backlight
4) The meter will automatically power off alter approximately 10 seconds
after the trigger is released.
Switching °C/°F
Long press for a second of the " SET " button till shows °C or °F
Temperature Switching Max/Min