General Warnings - Beta 1843BM Instrucciones

General Warnings

Wall mounting: Beta's cable and hose reels are supplied with two steel dowels
(10 mm) for reinforced concrete. If the should be mounted on other walls the
t pe and dimensions of the
trained staff.
pass between the rotating part and the
se might give off small spar s during standard operation thereb causing res
or e plosions in the presence of in ammables.
Do not use in wet environments: for friction brushes to be used it is recom-
mended to avoid o idation in the reel.
not dampen it with liquids.
Ma e sure that the cable is not damaged as the result of cutting abrasion or
melting through contact with hot surfaces. Safety would be affected.
Disabling cable holding feature: the cable/hose holding feature can be disa-
bled in all of Beta's cable and hose reels through the following procedure:
- disconnect the cable reel from the power supply;
- open the side cover closed by means of 4 he agonal head screws (3 mm);
- release the tooth spring from
(Fig. 1 + Fig. 2);
- close the cover back.
A
1
Disassembly: the two central half shells must be opened by trained person-
nel only; the interior accommodates a wound-up spring which might come out
une pectedly thereby causing damage or in ury to the operator.
Neither the plug nor the cable may be replaced; in case of damage safety will
be affected. nder such circumstances the item may no longer be used.
ing s stems should be accuratel selected b
ed part through friction brushes. he-
o not use the reel in wet places and do
ing point A and hoo it to
2
the cable reels let the current
EN
ing point B of
B
5