Use; Maintenance; Cleaning The Appliance - Imetec L1905 Instrucciones Para El Uso

• Detach the feeder (7) from the recharging contact (6) [Fig. D1] .
• press the ON/OFF switch
• the appliance switches on with MeDIUM power level [Fig. e1].
SUCTION POwER REGULATION:
• act on the power regulation button (9) to adjust the power.
• each time the button is pressed, the power level will turn, in sequence:
• from Medium to Max (all 3 leDs On)
• from Max to Min (First leD on)
• from Min to Medium (First and second leD on) [Fig. e1].
• Using the various power levels implies different cleaning autonomy. the following table
shows the average autonomy duration at the three power levels of the various versions.
Version
25v
32v
NOTE:
1. A new appliance can develop odours the first few times it is used. These odours
are harmless and disappear shortly afterwards. Ventilate the room.
2. The transparent walls may become opaque with use.
• When you have finished using the appliance, press the on/oFF button
it off.
ATTENTION! Turn the appliance off and/or take the feeder out of the power
socket before opening the dust collection system!
Make sure all cleaned parts are completely dry before reusing the
appliance.

CLEANING THE APPLIANCE

• Detach the feeder (7) from the recharging contact (6) [Fig. D1].
• switch the appliance off before cleaning it.
• When necessary, clean the appliance with a damp cloth.
ATTENTION!
DO NOT USE SOLVENTS OR OTHER AGGRESSIVE OR ABRASIVE
DETERGENTS. THIS CAN DAMAGE THE SURFACE.

USE

(8) once to switch the vacuum cleaner on or off.
MIN Position
about 60 min
about 90 min

MAINTENANCE

MED Position
about 26 Min
about 40 Min
EN
MAX Position
about 20 min
about 30 Min
(8) to switch
13