5 Cavitron Jet Air Polishing Inserts; 6 Tap-On; Operation; 7 Accessories And User Replaceable Parts - Cavitron JET Plus Instrucciones De Uso

8 5 Cavitron JET Air Polishing Insert
Insert Heater Rod: Heats
the delivered water for patient
comfort.
8 6 Tap-On™ Technology Wireless Foot
Pedal Operation
Using Foot Pedal in Tap-On
For scaling procedures,Tap-On
need to hold the pedal down. Tapping the foot pedal once
activates ultrasonic power or rinse mode for approximately
4 minutes. Tapping the foot pedal while in Tap-On
disables the ultrasonic power and water flow. Boost is still
available while scaling in Tap-On
depress the foot pedal to the second position (all the way to
the floor) to activate and hold as long as boost is desired.
Release foot pedal to return to Tap-On
NON-DEPRESSED
1st POSITION
For prophy procedures, Tap-On
Mode Auto Cycles eliminate the need to pump the pedal by
automatically cycling between rinse and polish. Tapping the
foot pedal once will enable an automatic air polishing/rinse
cycle that lasts for approximately 1 minute. Tapping the
pedal a second time disables the automatic air polishing/
rinse cycle. See Prophy Mode Auto Cycles in section 9.8 for
cycle details.
TIPS:
Tap-On Technology will not run water unless an
TM
insert or air polishing insert is in the handpiece
A sensor in the handpiece holder will prevent
Tap-On Technology from operating when the
TM
handpiece is in the holder.
If the foot pedal is not tapped quickly, it will
function in a conventional manner.
How to Disable and Enable Tap-On
Tap-On Technology feature can be disabled by
TM
simultaneously holding the Purge and Turbo buttons for a
period of approximately 5 seconds. The two buttons will blink
approximately 6 times. When the buttons are released, they
will blink an additional 6 times to confirm Tap-On
disabled.
Tap-On Technology feature can be enabled by
TM
simultaneously holding the Purge and Turbo buttons for a
Prophy Powder Delivery Tube: Directs
air/powder flow to insert tip.
Mode
T M
Technology eliminates the
TM
TM
mode. To use boost, simply
TM
mode.
T M
DEPRESSED DEPRESSED
2nd POSITION
Technology and Prophy
T M
Technology
TM
TM
has been
Insert Marking:
Manufacturer, Date (YDDD=Single digit
year and triple digit day of the year).
period of approximately 5 seconds. The two buttons will blink
approximately 6 times to confirm Tap-On
Using Foot Pedal without Tap-On
For scaling operation, the first position activates both the
ultrasonic energy and lavage at the insert tip. The second
position activates the Boost Mode. The Boost Mode (fully
mode
depressed Tap-On
power level for quick removal of tenacious deposits without
adjusting the power level knob. To deactivate Boost Mode,
release Tap-On
For prophy operation, the first position activates Rinse
Mode. The second position activates Air Polishing Mode.
(Boost Indicator will not illuminate.)

8 7 Accessories and User Replaceable Parts

Accessories
8.7.1
1. AC Power Cord
2. Tap-On
TM
3. Auxiliary Tap-On
4. Cavitron JET-Mate Sterilizable Handpiece
5. Prophy Handpiece Cleaning Wire
6. Cavitron 30K Ultrasonic Inserts
7. Cavitron DualSelect Dispensing system
8. Cavitron JET Air Polishing Insert
9. Cavitron JET Nozzle Cleaning Tool
10. Cavitron Prophy-Jet Sodium Bicarbonate Prophy Powder
11. Cavitron Jet Fresh Aluminum Trihydroxide Prophy Powder
User Replaceable Part Kits
8.7.2
1. Powder Bowl Cap O-Ring, Part Number 628052001
2. Powder Bowl Cap, Part Number 81728
3. Cavitron Insert Replacement O-ring Kits, 12/packs
Part Number 62351 (black) for plastic and soft grips
Part Number 62605 (green) for metal grips and air
polishing insert
4. Handpiece Cable O-Ring, Part Number 79357
5. JET-Mate Handpiece Nozzle Grip, 81717
6. Lavage (Water) Filter, 10/Pack, Part Number 90158
For detailed information, contact your local DENTSPLY
Professional Representative or authorized DENTSPLY
Professional Distributor.
16
O-Ring:
Seals water when Insert is fully seated in
Handpiece. O-ring should be replaced when
worn.
Mode
T M
Foot Pedal) increases the ultrasonic
TM
TM Foot Pedal to first position.
Technology Wireless Foot Pedal
TM Foot Pedal Power Cable
Air Polishing Insert Nozzle:
Tube-in-a-tube design delivers
precise air/water/powder mixture
at point of delivery.
TM
has been enabled.