INSTRUCTIONS FOR USE
d. To reduce the chances of patient tissue damage, care should be taken to ensure
proper orientation and location of padding.
e. All modifications, upgrades, or repairs must be performed by an authorized
specialist.
CAUTION:
Do not exceed safe working load shown in the product specification table
Product Specifications:
Mechanical Specifications
Product Dimensions
Material
Safe Working Load on the device
Overall Weight of Complete Device
Storage Specifications
Storage temperature
Storage Relative humidity range
Operating temperature
Operating Relative humidity range
Electrical Specifications
Not Applicable.
Software Specifications
Not Applicable.
Compatibility Specifications
The Allen Traction Boot Clamp is
compatible with:
Note: Consult the corresponding IFU for the products mentioned in the above table.
Sterilization Instruction:
This device is not intended to be sterilized. Equipment damage may occur.
Document Number: D-720682
Version: C
5.25" x 3.5" x 3.5" (13.3cm x 9cm x 9cm)
Aluminum, Stainless Steel
500 lbs. (226 kg)
2.4 lbs. (1.08 kg)
-29ᵒ C to +60ᵒ C
15% to 85%
This device is intended to be used in a
controlled Operating Room environment.
Not Applicable.
Not Applicable.
The Allen Traction Boot and any orthopedic
fracture tables that contain US, EU, UK, DEN, JP,
Swiss rails at the end of the traction units.
Page 16
Description
Description
Description
Description
Description
Issue Date: 31 MAR 2020
Ref Blank Template: 80025117 Ver. F