V. USB, Auxiliary and Optical digital connection
1. Insert one end of the supplied Optical digital cable into the matching input jack
on the back of the sound bar and the other end on the device you wish to play
audio from.
2. For Aux wired playback, connect one end of the supplied auxiliary cable to the
corresponding port on the soundbar and the other end to audio devices fitted
with a 3.5mm jack.
3. Likewise, if you want to play music directly from a flash drive, simply insert your
storage device into the USB port on the right side of the unit.
4. Plug the AC cable into a wall outlet.
5. Turn on the soundbar by pressing the Power button located on the right side
panel of the unit. You can also press the red Power button on the remote
control.
6. Select the input mode by pressing the Input button located on the remote
control.
7. Using the controls on the remote, you can manage and select your tracks,
increase or lower the volume, mute the soundbar audio, etc.
VI. Advanced operation
Pairing the soundbar with your Bluetooth
Note: Before installing this product, please make sure your device is compatible
with Bluetooth
.
®
1. First switch the system on from the standby mode using the Power button
found on the right side of the unit or on the remote control, if you haven't done
so already. The BT indication will appear on the display.
2. Place both devices not more than one meter away from each other.
3. Enable the Bluetooth
function on your audio device and set it to discover the
®
wireless soundbar.
4. Select the Bluetooth
mode on the soundbar. A short beep will be heard, and
®
the BT icon will start blinking to indicate that the system has entered into the
pairing mode.
5. Once the soundbar appears listed under the newly found Bluetooth
(KSB-210), the pairing process will start.
6. If pairing is successful, another short beep will be heard, and the BT icon will
stop blinking.
7. If after 60 seconds the pairing process fails, please repeat steps 1 through 6
described above.
®
device
devices
®