Black and Decker TO5000SD Manual De Uso Y Cuidado página 9

1 .
3 .
Unplug the appliance when not in use .
CONVECTION ONLY
Preheating will be required before cooking, but still cook using convection
technology .
1 . After selecting the BAKE function, press the NO PREHEAT button to deselect .
The CONVECTION button will still be lit .
2 . Turning the TEMP knob, adjust temperature to desired temperature .
3 . Turning the TIME knob, adjust time to set cook time .
4 . Press the START/STOP button to begin preheating .
5 . The temperature display will blink while the oven is preheating .
6 . Once the oven has preheated, you will hear 2 audible beeps and the cook time
set will automatically begin counting down .
7 . Place food directly on wire rack or insert pan into rack guide .
8 . There will be 3 audible beeps once the baking cycle is complete and the oven
will stop heating .
9 . Unplug the appliance when not in use .
After selecting the
BAKE function,
the NO PREHEAT
and CONVECTION
buttons will light up
automatically unless
they were deselected
during the last
bake cycle .
Using the TIME
knob, adjust time
to recommended
cook time . DO NOT
ADD IN TIME FOR
PREHEATING THE
OVEN—THE OVEN
DOES NOT NEED TO
PREHEAT WHEN THE
NO PREHEAT OPTION
IS CHOSEN .
9
2 . Using the TEMP knob,
adjust temperature
to recommended
temperature .
4 . Press the Start/
Stop Button to begin
baking .
5 . There will be 3
audible beeps once
the baking cycle is
complete . The oven
will stop heating .