Pond Boss 52349 Manual De Instrucciones página 7

Step 3. Choose a fountain head
3
for the desired water effect, and
assemble your choice as shown.
Step 4. Connect the extension tube
to the outlet of the pump using the
supplied adapters.
NOTE: pump not included.
For Fountain Pump 320 gph and
Pond Pumps 200-800 gph, use the
3/4" adapter and swivel adapter to
connect the extension tubes to the
4
outlet of pump.
For the Fountain Pump 525 gph,
use the 5/8" adapter and swivel
adapter to connect the extension
tubes to the outlet of pump.
NOTE: 5/8" adapter is NOT
INCLUDED in this kit but with the
purchase of the pump.
Step 5. Place the pump into water
and connect the pump into a
5 6
properly grounded electrical outlet.
If the diverter valve was used,
you can adjust the flow control as
needed.
Step 6. Utilize the pivoting base to
achieve a more vertical fountain
display if needed, and tighten the
locking nut for a secure fit.
PLEASE CALL CUSTOMER CARE BEFORE RETURNING ITEM TO STORE: 1-888-755-6750 7