Function Mapping Dcc; Examples Of Function Mapping - L. G. B. E275227 Manual Del Usuario

• All of the functions can be controlled according to the
function mapping (see CV description).
• See the CV description for the DCC protocol for additional
information.
We recommend that in general programming should be
done on the programming track.

Function Mapping DCC

It is possible to assign functions controlled from the decoder
to function buttons of your choice (mapping). To do this an
appropriate value must be entered in the appropriate CV.
The CVs (lines) and the functions (columns) are listed in
the tables on pages 40/41. Four CVs belong to each button.
For space reasons the 4 CVs were put together in one line
starting with CV 282 (Button F5).
It is basically possible to assign several functions to one
button or one function to several buttons.
Note: The programming for function mapping should be
done only by experienced users.
Individual functions can be controlled by means of SUSI
depending on the design of the decoder. These functions
can be handled by the decoder as sound. The volume levels
belonging to these functions cannot be changed.
10

Examples of Function Mapping:

AUX 2 is to be forwards and backwards on Function 3
CV 272 & CV 372 = 8
CV 273 & CV 373 = 0
CV 274 & CV 374 = 0
CV 275 & CV 375 = 0