Publicidad
REPLACING THE WASHER NOZZLE / REEMPLAZO DE LA BOQUILLA DE LAVADO / REMPLACEMENT DE LA BUSE DE NETTOYAGE
1
Nozzle
H/C
Nozzle
Forward
Massage
Clean
Water
Water
Pressure
Pressure
Dryer
Water
Nozzle
Temp.
Temp.
Backward
With the machine turned on and the seat in the up position, press the "Nozzle Clean"
button on the remote to extend the cleaning wand.
Con la máquina encendida y el asiento en la posición hacia arriba, presione el botón
"Limpiar Boquilla" en el control remoto para extender la varilla de limpieza.
Mettre le mécanisme sous tension et lever le siège. Appuyer sur le bouton « Nettoy-
age de la buse » de la télécommande pour que s'allonge la tige de nettoyage.
3
Firmly hold the body of the cleaning wand and press the new nozzle tip (B) into
place.
Sostenga firmemente la varilla de limpieza y embone la nueva punta de la boquilla
(B) en su lugar.
Tenir fermement le corps de la tige de nettoyage et insérer la nouvelle extrémité de
buse (B) bien en place.
Remote Control Pair Code:
Night
(1) Unplug the product.
Light
(2) Press and hold the "Stop" button until the Dryer
Temp/Water Temp/Seat Temp lights start to blink.
(3) Place the remote control near the toilet and plug
the product back in.
(4) The lights of Dryer Temp/Water Temp/Seat Temp.
will stop blinking and stay solid to indicate successful
Seat
pairing. (If remote still does not work, restart the pairing
Temp
process or check the battery.
A
B
2
While holding the body of the cleaning wand (A), grab the nozzle tip (B) and pull off
the wand.
Mientras sostiene la varilla de limpieza (A), tome la punta de la boquilla (B) y retire la
varilla.
Tenir d'une main le corps de la tige de nettoyage (A) et saisir l' e xtrémité de la buse
(B) de l'autre main, puis tirer ensuite sur la tige.
4
Nozzle
H/C
Nozzle
Forward
Massage
Clean
Water
Water
Pressure
Pressure
Dryer
Water
Nozzle
Temp.
Temp.
Backward
Press the "Nozzle Clean" button on the remote control to retract the cleaning wand
with the replaced nozzle tip.
Presione el botón "Limpiar Boquilla" en el control remoto para retraer la varilla de
limpieza con la nueva punta de la boquilla.
Appuyer sur le bouton « Nettoyage de la buse » de la télécommande pour que la tige
de nettoyage munie de sa nouvelle buse puisse se rétracter.
INS11062 - 10/20
A
B
Remote Control Pair Code:
Night
(1) Unplug the product.
Light
(2) Press and hold the "Stop" button until the Dryer
Temp/Water Temp/Seat Temp lights start to blink.
(3) Place the remote control near the toilet and plug
the product back in.
(4) The lights of Dryer Temp/Water Temp/Seat Temp.
will stop blinking and stay solid to indicate successful
Seat
pairing. (If remote still does not work, restart the pairing
Temp
process or check the battery.
Publicidad
