Idle Speed Adjustment - Ryobi RBC26SBB Manual Del Usuario

EN
FR DE ES IT
For proper performance and longer life, keep the air filter
screen clean.
Ensure the unit is in the off position.
Remove the air filter cover.
Remove the air filter and clean it with warm soapy
water.
Rinse, and let the air filter dry completely.
Work two drops of lubricant into the air filter.
Replace the air filter (fits only one way).
Replace the air filter cover.
FUEL CAP
ARNING
A leaking fuel cap is a fire hazard and must be
replaced immediately.
The fuel cap contains a non-serviceable filter and a
check valve. A clogged fuel filter will cause poor engine
performance. If performance improves when the fuel cap
is loosened, check valve may be faulty or filter clogged.
Replace fuel cap if required.
SPARK PLUG REPLACEMENT (Fig. 12)
This engine uses a Champion RCJ-6Y or equivalent
spark plug with 0.63 mm electrode gap. Use an exact
replacement and replace annually.

IDLE SPEED ADJUSTMENT

If the cutting attachment turns at idle, the idle speed screw
needs adjusting on the engine, contact a service dealer for
adjustment and discontinue use until the repair is made
STORAGE (1 MONTH OR LONGER)
Drain all fuel from tank into a container approved
for fuel. Run engine until it stops.
Clean all foreign material from the trimmer. Store it in
a well-ventilated place that is inaccessible to children.
Keep away from corrosive agents such as garden
chemicals and de-icing salts.
Abide by all ISO and local regulations for the safe
storage and handling of fuel. Excess fuel should be
used up in other 2-stroke engine powered equipment.
PT NL SV DA NO FI
English (Original Instructions)
HU CS RU RO PL SL
20
HR ET LT LV SK BG