RIB ARROW AGG4632 Instrucciones Para El Uso Y La Instalacion página 2

I S O
0 1
9 0
Telefono +39.030.2135811
Fax +39.030.21358279-21358278
automatismi per cancelli
http://www.ribind.it - email: ribind@ribind.it
automatic entry systems
1. GENERAL DESCRIPTION
The 6 functions selector allows to select the operation of the automatic doors RIB type ARROW in the following configurations:
Lock
allowing manual operation
It disables the external
entry sensor - the electric
lock (optional) becomes
operative - allows exit only
Keep the door open
for a detailed description of operating and programming see the instructions of the programmer JVOP-100 code no. ACG4600.
2. INSTALLATION INSTRUCTIONS
Cut the bridge between the 2 cables connected to the entries 9 and 5 of the connector CN3 in the control box of the connections of the door Arrow. (Pict.2)
Connect the entries 3.6.7.9.8.5 of the connector CN3 in the Arrow connection board to the respective entries of the 6 functions selector internal connector (see Pict. 3).
Use one of the 3 available entries to insert the cables in the 6 function selector.
25014 CASTENEDOLO (BS)-ITALY
Via Matteotti, 162
inoperative -
OPERATING AND INSTALLATION INSTRUCTIONS
ARROW 6 FUNCTIONS SWITCH
CODE ACG4632
Normal automatic operation.
(Pict. 1)
(Pict. 3)
(Fig. 4)
Automatic movement with
limitation of opening
width for energy saving .
The door closes - the
sensors are excluded - the
electric lock (optional)
locks the door
(Pict.2)