Nice Moon MOMB Instrucciones Y Advertencias Para La Instalación Y El Uso página 7

• "STATIC 1" mode (command n° 1) with MASTER card 1
This function allows to program one or more new cards only to activate com-
mand n° 1. The operation can be repeated at any time.
01. Pass the MASTER card 1 in front of the reader once;
02. Pass the new card in front of the reader once
Recommendations: - After the first card others can be programmed one at a
time by repeating the procedure from point 02. - The procedure ends after 10
seconds if new cards are not passed or if a MASTER card is passed.
• "STATIC 2" mode (command n° 2) with MASTER card 2
This function allows to program on or more new cards, on to activate command
n° 2. The operation can be repeated at any time.
01. Pass the MASTER card 2 in front of the reader once;
02. Pass the new card in front of the reader once
Recommendations: - After the first card others can be programmed one at a
time by repeating the procedure from point 02. - The procedure ends after 10
seconds if new cards are not passed or if a MASTER card is passed.
Program valid cards with 1 unique "MASTER" card in STATIC 1
mode (command n°1) or STATIC 2 mode (command n°2) or DYNAM-
IC mode (command n°1 and n°2)
The programming procedures can only be performed after having created the
unique "MASTER" card:
• "STATIC 1" mode (command n° 1)
This function allows to program on or more new cards, on to activate command
n° 1. The operation can be repeated at any time.
01. Pass the unique MASTER card in front of the reader once;
02. Pass the new card in front of the reader once
Recommendations: - After the first card others can be programmed one at a
time by repeating the procedure from point 02. - The procedure ends after 10
seconds if new cards are not passed or if the unique MASTER card is passed.
• "STATIC 2" mode (command n° 2)
This function allows to program one or more new cards only to activate com-
mand n° 2. The operation can be repeated at any time.
01. Pass the unique MASTER card in front of the reader once;
02. Pass the new card in front of the reader twice
Recommendations: - After the first card others can be programmed one at a
time by repeating the procedure from point 02. - The procedure ends after 10
seconds if new cards are not passed or if the unique MASTER card is passed.
• "DYNAMIC" mode (command n° 1 and n° 2)
This function allows to program one or more new cards, valid to activate both
commands (n°1 and n°2). The operation can be repeated at any time.
01. Pass the unique MASTER card in front of the reader once;
02. Pass the new card in front of the reader three times
Recommendations: - After the first card others can be programmed one at a
time by repeating the procedure from point 02. - The procedure ends after 10
seconds if new cards are not passed or if the unique MASTER card is passed.
4.3.4 - DELETE CARD
This function allows to delete one card at a time.
01. Pass the MASTER card(*) in front of the reader twice;
02. Pass the card to be deleted in front of the reader once
(*)Note – The MASTER card 1 or MASTER card 2 or the UNIQUE MASTER card
must be used depending on the group to which the card to be deleted belongs.
Recommendations: - If several cards must be deleted, repeat the procedure
from step 02 for every card. - The deletion procedure ends if:
a) no other card is passed in front of MOMB for 10 seconds;
b) the card to be deleted is not memorised;
c) the MASTER card is passed in front of the reader again.
4.3.5 - PROCEDURE FOR COUNTING MEMORISED CARDS
With this function it is possible to check the number of cards valid for command
n° 1 and for command n°2.
01. Pass the MASTER card(*) in front of the reader three times
The sequence of acoustic tones will follow with the following meaning:
3 tones = 1 hundredth (a sequence of 3 tones corresponds to 100 cards)
2 tones = 1 tenth (a sequence of 2 tones corresponds to 30 cards)
1 tone = 1 unit (two sequences of 1 tone corresponds to 2 cards)
English – 5