Before Starting Engine - Ducati DCS 5500R Manual De Instrucciones

h. Always be sure to include this manual when
selling, lending, or otherwise transferring the
ownership of this product.
i. Never allow children or anyone unable to
fully understand the directions given in this
manual to use this product.
Working gear and clothing
a. When using the product, you should wear
proper clothing and protective equipment as
follows.
(1) Helmet
(2) Protection goggles or face protector
(3) Thick work gloves
(4) Non-slip-sole work boots
(5) Ear protectors
b. And you should carry with you.
1. Attached tools and files.
2. Properly reserved fuel and chain oil.
3. Things to notify your working area (Rope,
warning signs)
4. Whistle (for collaboration or emergency)
5. Hatchet or saw (for removal of obstacles)
c. Never use the product when wearing pants
with loose cuffs, when wearing sandals, or
when barefoot.
Warning considering handling of fuel
a. The engine of this product is designed to
run on a mixed fuel which contains highly
flammable gasoline. Never store cans of
fuel or refill the fuel tank in any place where
there is a boiler, stove, wood fire, electrical
sparks, welding sparks, or any other source
of heat or fire which might ignite the fuel.
b. Smoking while operating the product or
refilling its fuel tank is extremely dangerous.
Always be sure to keep lit cigarettes away
from the product at all times.
Owner's manual
c. When refilling the tank always turn off the
engine first and take a careful look around to
make sure that there are no sparks or open
flames anywhere nearby before refueling.
d. If any fuel spillage occurs during refueling,
use a dry rag to wipe up spills before turning
the engine back on again.
e. After refueling, screw the fuel cap back
tightly onto the fuel tank and then carry the
product to a spot 3m or more away from
where it was refueled before turning on the
engine.
NOTE
If fuel or product is ignited, please put out fire
with dry powder fire extinguisher.

Before starting engine

Check working place, the cutting object and
cutting direction. It there is obstacle, remove it.
Never start cutting until you have a clear work
area, secured footing and a planned retreat
path from the falling tree.
Use caution and keep bystanders and animals
out of the working area whose diameter is 2.5
times of the cutting object.
Inspect the machine for worn, loose, or
amaged parts. Never operate the machine
that is damaged, improperly adjusted, or is not
completely and securely assembled.
Make sure that the saw chain stops moving
when the throttle control trigger is released.
When starting the engine
Always hold the machine firmly with both
hands when the engine is running. Use a firm
grip with thumb and fingers encircling the
handles.
Keep all parts of your body away from the
machine when the engine is running.
Before starting the engine, make sure the saw
chain is not contacting anything.
Operation
Keep the handles dry, clean and free of oil or
fuel mixture.
Never touch the muffler, spark plug or other
English
33