How It Works - Cooper Lighting MD42FLB Instrucciones

MD42FLW_FLB 825-0418.qxd:MD Series 325-1432.qxd
Congratulations. You have just purchased a dusk to dawn Cooper Lighting,
LLC entry and patio lantern. This fixture will provide years of trouble-free light
for your home.

How it works

Your dusk to dawn decorative patio and deck lantern features a light sensor
that automatically turns the light on at dusk and off at dawn.
What you need
• Hammer
• Screwdriver
• Drill with 3/16˝ drill bit
• Adjustable wrench
• 1/2˝ diameter, flexible conduit (length depends on application)
• 1/2˝ watertight conduit connectors
• Wire connectors (if house wire is threaded type)
• Weatherproof junction box or lampholder
mounting plate
• Silicone caulk
What's included
• Fixture housing with light sensor (A)
• One-piece lens (B)
• Access cover (C)
• (2) Access cover mounting screws (D)
• (3) Fixture mounting screws (E)
• (1) Lens lock screw (F)
• Mounting plate adapter and locknut (G)
• (3) Mounting plate adapter screws and nuts (H)
• Light shield/reflector (optional) (I)
• Bulb - CFL (J)
CAUTION: RISK OF FIRE. When purchasing replacement bulbs, use
only 4U-42W bulb made by Shanghai Dongsheng Electric Co. or 9142B
made by Lights of America.
What to know
• For indoor and outdoor use.
• cULus Listed for wet locations.
• Fixture must be connected to a 120 Volt, 60 Hz power source. Any other
connection voids warranty.
For assistance, call 1-800-334-6871 or e-mail us at ConsumerProducts@cooperlighting.com
9/3/09 12:59 PM
C
E
F
D
I
2
Page 2
MD42FLB
MD42FLW
A
B
G
H
J