Fitting Accessories; Zoom Head Accessories - Elinchrom ZOOM Pro HD Manual De Instrucciones

User Manual

fITTING ACCESSORIES

1. Always switch the unit off before attaching accessories.
EN
2. Disconnect the flash cable from the power pack.
3. Mount the ZOOM Head to a tripod and lock the security screw.
4. Turn the locking ring of the reflector bayonet anticlockwise in OPEN position.
5. Insert an accessory and turn it clockwise until you hear it click into place.
6. Turn the locking ring clockwise to close the bayonet, indicated by the white mark
on the bayonet ring.
7. Check if the Reflector is well fitted.
8. Reconnect the flash cable to the power pack and switch the unit on.

ZOOM HEAD ACCESSORIES

fLASH TUBES:
ZOOM PRO HD // 24082
ZOOM ACTION // 24083
ZOOM PRO // 24081
HALOGEN LAMpS:
MAX. 300 W / 230 V Halogen GX 6.35 // 23022
MAX. 300 W / 110 V Halogen GX 6.35 // 23030
GLASS DOMES:
Glass Dome, transparent (standard configuration) // 24918
Glass Dome, frosted // 24919
ZOOM HEAD ExTENSION CABLE:
5 m // 21040
10 m // 21041
10
More user manuals on
ManualsBase.com