Connecting And Charging - Braun Oral-B Professional Care 7000 DLX Serie Manual De Instrucciones

The Oral-B Professional Care™ has been developed together
with leading dental professionals to effectively remove plaque
from all areas of your teeth. It adds a gentle pulsating action
to its oscillation to create a deep-cleaning 3D brushing action.
It has been designed for daily use for the whole family.
Please read the use instructions carefully before first use.
Important
Periodically check the cord for any damage. Should this
be the case, take the charging unit (e) to a Braun Service
Center. A damaged or non-functioning unit should no longer
be used.
Description
a Brushhead
b Switch
c Handle
d Charge indicator
e Charging unit
f Roll-stop
g Brushhead compartment
h Wall holder
®
i Power Tip
Specifications
Power supply: see bottom of charging unit
Handle voltage: 1.2 V

Connecting and charging

The toothbrush is electrically safe and can be used in the
bathroom without hesitation.
• Plug the charging unit into an electrical outlet. Place the
handle on the charging unit
.
• The charge indicator (d) flashes while the handle is being
charged.
• When the handle is fully charged, the charge indicator lights
permanently. A full charge takes at least 16 hours and
provides an operation time of approximately 45 minutes.
• For everyday use, the handle can be stored on the
plugged-in charging unit to maintain the toothbrush at
full power. Overcharging is impossible.
Battery maintenance
To maintain the maximum capacity of the rechargeable
battery, you must discharge it at least once every 6 month.
To do this, unplug the charging unit and allow the battery to
run down with normal use.
16 h
5