Cuckoo CP-MN031 Manual Del Usuario página 8

How To Use / How To Set
❹
Button Lock function
▶ It is used to lock the buttons to prevent the appliance from false operation when
cleaning or when children touch the buttons.
▶ Press the Button Lock button for 2 seconds in Standby mode to lock the device.
▶ Press the Button Lock button again for 2 seconds to unlock the device.
❺
Auto Flow function
▶ This function automatically dispenses purified water.
▶ Hold down the Out Flow button in the Standby mode for 0.3 seconds, and purified
water will be dispensed.
☞ In case of Auto Flow, the flow will stop when the device has dispensed water for 30
seconds.
☞ If you press the "Out Flow" button for 0.3 seconds during Auto Flow, the function
will stop, and the device will enter the Standby mode.
How To Set One Cup Quantity
❶
Press the One Cup button for 3 seconds in Standby mode to set the quantity for One Cup.
❷
Depending on the selected quantity, one or more of the following LEDs will be lit up: One Cup LED, Non-Stop
Flow LED, Button Lock LED, and Filter Replacement LED.(The default quantity is about 150cc.)
❸
Select your desired quantity for One Cup (about 130cc - 190cc) by pressing the Outflow button.
LEVEL
1
2
3
4
※
The quantity of dispensed water varies in accordance with the place of installation.
❹
Select your desired quantity for One Cup and press the One Cup button.
☞
If you press any other button than the Outflow or the One Cup button, it will be canceled and the product will return to Standby mode.
☞
If you fail to press any button for 20 seconds in the settings, it will be canceled and the product will return to Standby mode.
How to Set the Time for Non-Stop Flow
❶
Press the Not-Stop Flow button for 3 seconds in Standby mode to set the time for Non-Stop Flow.
❷
Depending on the selected time, one or more of the following LEDs will be lit up: One Cup LED, Non-Stop Flow
LED, Button Lock LED, and Filter Replacement LED. (The default time is about 60 seconds.)
❸
Press the Outflow button to select your desired time for Non-Stop Flow (50 to 80 seconds).
LEVEL
1
2
3
4
❹
Select your desired time and press the Non-Stop Flow button.
☞
If you press any other button than the Outflow or the Non-Stop Flow button, it will be canceled and the product will return to Standby
mode.
☞
If you fail to press any button for 20 seconds in the settings, it will be canceled and the product will return to Standby mode 8.
8
One Cup Quantity
Approx. 130 cc The One Cup LED is illuminated.
Approx. 150 cc (Default) The One Cup LED and the Non-Stop Flow LED are illuminated.
Approx. 170 cc The One Cup LED, Non-Stop Flow LED, and Button Lock LED are illuminated.
Approx. 190 cc The One Cup LED, Non-Stop Flow LED, Button Lock LED, and Filter Replacement LED are illuminated.
Selected Time
The One Cup LED is illuminated.
50 seconds
The One Cup LED and Non-Stop Flow LED are illuminated.
60 seconds (Default)
The One Cup LED, Non-Stop Flow LED, and Button Lock LED are illuminated.
70 seconds
The One Cup LED, Non-Stop Flow LED, Button Lock LED, and Filter Replacement LED are illuminated.
80 seconds
Display
Display