C - Ions/Uv Mode; D - Timer Function; E - Wifi Function; Maintenance And Cleaning - Olimpia splendid AURA CARE Insinstrucciones Para El Uso Y Manutencion

3.3.c - Ions/UV mode

By pressing the key "ION/UV" (T3), it is possible to set the UV lamp (10) intensity following this sequence:
Soft (low brightness) -- > Standard (maximum brightness) -- > Lamp off -- > Soft -- > ...
By pressing the key "ION/UV" (T3) for approximately 3 seconds, the function "IONS" activates.
Press the "ION/UV" key (T3) again for approximately 3 seconds to deactivate the function.

3.3.d - Timer function

When the appliance is on, by pressing the key "Timer" (T4) the LED (D6) changes according to this
sequence:
When the desired value is set, the corresponding LED (D6) remains steady on.
3.3.e - Wifi function
Press the key "Timer" (T4) for approximately 5 seconds to activate the "Wifi" function; the LED (D8)
starts to blink.
When the appliance connects with your smartphone, the LED (D8) stops blinking and remains
switched on steadily on the display.
The instructions for connection to the WiFi network and for use oft he App are available on
www.olimpiasplendid.com in the download area.

4 - MAINTENANCE AND CLEANING

Before proceeding with any maintenance and clean-
ing operation, always make sure to disconnect the
power plug from the socket.
Do not wash nor soak the appliance in water. Prevent
water from entering in contact with the internal com-
ponents of the appliance. Risk of electric shocks!

4.1 - CLEANING

a. Clean the appliance body (6) and the rear panel (1) with a wet cloth and with a mild detergent if necessary
(fig.D).
b. Clean the air suction grid (6a), the air inlet and outlet grid with a brush. If necessary, blow compressed
air for a more thorough cleaning (fig.D).
Do not use a chemically treated or antistatic cloth to clean the appliance.
EN - 10
Off ---> 2h ---> 4h ---> 8h ---> Off ---> 2h ---> ...