Filter Maintenance; Filter Replacement - Olimpia splendid AURA CARE Insinstrucciones Para El Uso Y Manutencion

Do not use gasoline, solvent, polish or similar solvents.
These products could cause the breakage or deformation of the plastic sur-
face.
Make sure the appliance is completely dry before reconnecting the plug to the
power socket.
Do not allow dust too accumulate in order to avoid malfunctions.
4.2 - FILTER MAINTENANCE (Fig.E)
a. Remove the rear panel (1) by pressing the lever (1a) and pulling the panel towards yourself.
b. Remove the filter (2) by means of the two tabs (2a) and clean dust on the surface.
It is advised to sterilize the filter by exposing it to sunlight.
c. Use a soft cloth with a neutral detergent to clean the inside of the appliance (Fig.E).
d. Reposition the filter (2) inside the appliance making sure the tabs (2a) are positioned in the same way as
before (Fig.F).
e. Reposition the rear panel (1) on the appliance body (6) by inserting the lower hooks (1b) in the specific
seats (6b) first, then press the lever (1a) and push the panel (1) until you hook it.
Do not wash the filter.
Do not use a vacuum cleaner directly into contact with the filter.
4.3 - FILTER REPLACEMENT (Fig.H)
After approximately 2200 hours of operation, the warning LED "Filter to be replaced" (D5) blinks (red), indi-
cating that the filter MUST be replaced (Fig.G).
Do not use the appliance without filter or if the latter is damaged.
Do not use the appliance beyond the 2200 h of operation without changing
the filter.
a. Remove the rear panel (1) by pressing on the lever (1a) and pull towards yourself.
b. Extract the filter (2) by means of the two tabs (2a).
c. Replace the filter (2) with a new one.
d. Reposition the filter (2) inside the appliance making sure the tabs (2a) are positioned in the same way as
before.
e. Reposition the rear panel (1) on the appliance body (6) by inserting the lower hooks (1b) in the specific
seats (6b) first, then press the lever (1a) and push the panel (1) until you hook it.
After replacement of the filter, press the button (T2) for approximately 7 seconds; the appliance
resets its usage time (2200 h).
EN - 11
AURA CARE