Inserting Storage Media - Kompernaß WK 8 B3 Instrucciones De Uso

Inserting storage media

NOTICE
► Since the camera has no built-in memory, it can only work if an
microSDHC memory card m is inserted.
► The device supports microSDHC memory cards with a capacity
of up to 512 GB.
► Use a microSDHC card with a speed rating of 10.
Using memory cards with a speed rating of less than 10 can
lead to picture errors during recording.
ATTENTION
► To avoid malfunctions, keep the memory card away from
moisture and avoid strong vibration, dust, heat sources and
direct sunlight.
► Insert the memory card as indicated by the icon
Never force the memory card into the slot. Never bend or twist
the memory card.
► After transport, wait until the memory card has reached ambi-
ent temperature before using it for the first time. Major fluctua-
tions in temperature or humidity can lead to condensation
which could cause an electrical short-circuit. Keep the memory
card in the storage box M.
♦ To insert a microSDHC memory card into the memory card slot e
of the device, push it into the slot until it clicks into place. The
electrical contact of the memory card must be facing towards the
front of the camera.
♦ To remove a microSDHC memory card m from the memory card
slot e of the device, press the protruding edge of the memory
card in a little way until it pops out. Then remove the memory card.
■ 18 │ GB │ IE
on the slot.
WK 8 B3