Max ERZ-300 Manual De Instrucciones página 3

● Keep water, chemicals and other liquids away from the equipment. If liquids penetrate the
equipment, immediately unplug the power cord from the electrical outlet and contact the
place of purchase for servicing. Using the equipment while wet on the inside can result in
damage, fire and/or electric shock.
● Do not use the equipment when in anything but proper working condition. Using the
equipment while emitting smoke, strange noises or odors can result in fire and/or electric
shock. Immediately unplug the power cord from the electrical outlet and contact the
place of purchase for servicing.
● When fixing paper jams, be sure to unplug the power plug from the socket. If the product
unexpectedly operates, there is a risk of injury.
● When changing the place where product is set up, be sure to unplug the power plug from the
socket first. Moving with the power plug left plugged in to the socket may damage the
plug or cord, leading to fire or electric shock.
● Do not disassemble or remodel the equipment. This can result in damage, fire and/or
electric shock.
● Periodically clean the power cord plug. Dust buildup over time can result in fire and/or damage.
● Use a dedicated socket within the rated voltage (100 to 240V) for the power source. Using a
power source outside the rated voltage may lead to malfunction, fire, or electric shock.
● Install the equipment so that it sits level. Do not install it on shaky tables, inclined surfaces
or anywhere it would be unstable. Toppling over or falling can result in injury and/or damage.
● Do not use the equipment where directly exposed to sunlight, high temperatures and
humidity, or condensation. This can destabilize operation and result in damage.
● Do not share the electrical outlet with equipment that requires high capacity supply (air
conditioners/heaters, refrigerators, microwave ovens, office equipment, etc.). Voltage
drops can cause the equipment to malfunction.
● For safety's sake, unplug the power cord from the electrical outlet before holidays and other
long periods of disuse.
● Hold the bottom of the main unit when moving the product. Failure to do so may lead to
injury or malfunction.
● The ends of removed staples are sharp, so handle them with caution. Failure to do so may
lead to injury.
■ Disclaimer
Max. Co., Ltd. assumes no responsibility whatsoever for damage or injuries resulting from the failure
to observe the information in this manual, or losses, lost profits or damage to important documents
and any secondary damages associated therewith because the equipment is damaged or otherwise
out of order.
■ Requests to users
ATTENTION:
Observe the following to prevent equipment trouble and unexpected breakdowns.
1. Do not use or store in the following locations as that may lead to troubles.
(1) Places in direct sunlight or near heat sources such as heaters
(2) Places with much dust or moisture
(3) Places that are slanted or where vibration or shock are applied
(4) Places with temperature of 10ºC or less or 35ºC or greater
(5) Highly humid environments
2. Do not tilt or turn over with staples inside.
3. Do not carry with staples inside.
4. When cleaning the product, wipe with a soft, dry cloth. Do not use organic solvents such as
thinner, benzine, or alcohol or other chemicals. Doing so may lead to deformation or discoloration.
5. For safety reasons, the product is designed not to operate when the cover is open. Close the cover
securely when using.
WARNING
CAUTION
2