LOWES FS40-U3X Manual Del Propietário página 7

2.Place the Back Grille against
the motor housing ,insert the
two upper Buckles into the
Buckle Holes, then slide them
down to the small holes with a
little force.
Align the bottom buckle with
the screw hole, then tighten the
Screw to secure the Back Grille
to the motor . Figure 10
3.Remove the plastic sleeve from the motor
shaft. Loosen the screw at the back of
the Fan Blade,and slide the Fan Blade onto
the motor shaft. Figure 11.
4.Retighten the Screw on the blade assembly
to secure it to the motor shaft. Make sure that
the end of the screw is positioned within the
flat notch on the shaft. Figure 12.
Buckles
Figure 10.
Blade screw
7
Front side
Figure 11.
Figure 12.