Parts Supplied - Pioneer AVIC-X3II Manual De Instalación

Section
04 Installation
! When installing the hide-away unit in the
boot, use the extension cable (e.g. CD-
SC300E)(sold separately).
! Do not install the display unit in a position
where the opening of the LCD panel is ob-
structed by any obstacles, such as the
gearstick. This may cause interference with
the gearstick, or a malfunction of the me-
chanism of the display unit.
! Make sure you leave enough gap between
the dashboard and the LCD panel of the
display unit so the LCD panel can be
opened and closed without contacting with
the dashboard.
LCD panel
22
Engb
Dashboard
Leave gap

Parts supplied

Parts marked (*) are pre-installed.
The hide-away unit
Holder*
Washer faced screw
(4 mm × 8 mm)
(4 pcs.)
Frame*
Side bracket (large)
(2 pcs.)
Conceal tape
The display unit
Side bracket
(2 pcs.)
Self-tapping screw
(6 mm × 16 mm)
(4 pcs.)
Side bracket (small)*
(2 pcs.)
Screw for fixing the
side bracket*
(5 mm × 6 mm)
(2 pcs.)
Double-ended screw