Publicidad
Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS.-
The assistance of a second person is
recommended when assembling this
unit Take the unit out of its box and
make sure that all of the pieces are
there Fig.1:
(1) Monitor; (2) Bracket; (55) Main
body; (4) Handlebar; (6) Handlebar
stem; (17) Saddle post; (9) Horizontal
saddle tube; (8) Saddle; (36) Rear
stabiliser bar with adjustable feet; (54)
Front stabiliser bar with wheels; (21L)
Left pedal; (21R) Right pedal; (35) Slot
head bolt M-10; (51) (52) Flat washer
M10; (32) Cap nut M10.
1. Position the machine's rear stand
on the rear stabilizer bar (36), as
shown in Fig.2, insert the bolts (35), fit
the flat washers (51) (52) and cap nuts
(32) and then tighten securely.
2. Position the front stabiliser bar with
wheels (54) with the wheels facing
forwards, as shown in Fig.2, insert the
bolts (35), fit the flat washers (51) (52)
and
cap
nuts
securely.
3.- FITTING THE HANDLEBAR.-
Position the handlebar (4) on the
handlebar stem (6), Fig.3, tighten the
knob
(18)
and
handlebar stem (6) into the hole on the
main body (55), Fig.3. Position it
correctly and then tighten knob (18) by
turning it clockwise.
ADJUSTING THE HANDLEBAR
HORIZONTALLY.-
Position the handlebar
comfortable
distance
exercise,
now
securely, Fig.3.
Stay within the references.
(32)
and
tighten
then
insert
(4)
at a
for
doing
tighten
knob
ADJUSTING THE HANDLEBAR
VERTICALLY.-
Position the handlebar
comfortable
exercise,
securely, Fig.3.
Stay within the references without
going beyond the "STOP" mark.
4.- ATTACHING THE SADDLE.-
Fit the saddle bracket (8), Fig.4, onto
the horizontal saddle tube (9), as
shown in Fig.4, fit the saddle into
position and tighten the nuts on the
bracket securely.
Next insert the horizontal saddle tube
(9) through the hole on the saddle post
(17), Fig.4, position it correctly and
tighten the knob (18), Fig.4.
Insert the saddle post (17) into the
boss on the main body (55), position it
correctly and tighten the saddle post
by using the adjustment knob (18),
Fig.4, turning it clockwise.
ADJUSTING THE SADDLE HEIGHT.-
Loosen the saddle post adjustment
knob
(18)
anticlockwise, Fig.4, move the saddle
to a position comfortable for doing
exercise
adjustment knob (18) securely by
the
turning it clockwise.
Stay within the references without
going beyond the "STOP" mark.
HORIZONTAL
THE SADDLE.-
Loosen the knob (18) slightly by
turning it anticlockwise, Fig.4, move
the saddle to a position comfortable
for doing exercise and then tighten the
(18)
knob (18) securely by turning it
clockwise.
10
distance
for
now
tighten
slightly
by
and
then
tighten
ADJUSTMENT
(4)
at a
doing
knob
(18)
turning
it
the
OF
Publicidad
