Sound Features; Listening To The Fm Radio - Muse M-1229 DAB Manual De Instrucciones

SOUND FEATURES

Volume adjusting:
To increase or decrease the sound level, rotate volume knob clockwise or anti-clockwise.
Muting the sound
When the unit is ON, press MUTE to mute the sound. Press again to restore.
Using volume knob to select sound feature
Repeatedly press volume knob
To select the desired mode for sound setting in the following order: "BASS"
"BAL" (Balance) "FAD" (Fader)
CLASS/ FLAT CLOCK.
After selecting the desired mode, you can adjust the level by rotating the volume knob.
Preset equalizer (EQ)
When you are listening to pop music, classic music or rock music, use the equalizer to adjust
the sound quality. Repeatedly press volume knob to select "EQ OFF" and rotate volume knob
to select different equalizer mode in following order: EQ OFF
CLASS FLAT.
Switching Loudness On/off
By this function, you can increase the low frequency, which can improve sound sensitivity.

LISTENING TO THE FM RADIO

Selecting band
In FM mode, repeatedly press BAND button to select bands in following order: FM1
FM3.
Manual/automatic tuning
- Manual Tuning
Press and hold button or until "MANUAL" shows on display, then press button
continuously to select a station upward or downward. Press and hold button
tune the station with a faster speed.
Note: it will return to automatic tuning mode if no key is pressed within 4 seconds. "AUTO" will
shows on display 2 seconds.
- Automatic Tuning
Press or once, the radio automatically searches a station upward or downward respectively
and plays when it finds a station. Press
Scanning and memorizing stations
- By AMS / button.
1. In tuner mode, press and hold AMS /
and store them automatically in memory. All preset stations are scrolled during few seconds.
2. Press AMS /
button once to preview the preset stations. To remain on a station, press
again the AMS /
button.
"TRE" (Treble)
LOUD ON/OFF EQ OFF/ ROCK / POP/
ROCK
or once to stop scanning.
button for 3 seconds to start scanning for stations
GB - 5
- By number button 1-6
1. Tune to a station by
2. Press and hold one of the 1- 6 Number buttons for 2 seconds until display shows the
corresponding number, which indicates that station is stored in the corresponding number
button.
3. Under radio mode, press 1- 6 Number buttons to listen to stored stations.
4. When you are listening to a station stored on a number button, press and hold another number
button for more than 2 seconds to store the station on this number button.
Note: The unit can be stored up to 6 stations for each band.
RDS (Radio Data System)
This unit has a built-in RDS decoder system that supports broadcast stations transmitting RDS
data. This system can automatically switch to the broadcast station with the best reception as you
move on long distances (AF switching). Also if a traffic announcement (TA) or programme type
(PTY) is broadcast from a RDS station, no matter what mode you are in. this broadcast is received.
Press and hold volume knob, the unit will enter setting menu.
Shortly press volume knob to choose your desire item. Rotate volume knob to choose
corresponding setting desired: AF (ON/OFF)
POP
OFF) EON (LOC/DX)
- Alternative frequency (AF)
When the AF switching mode is selected, the radio scans the signal strength of alternative
frequencies. A new AF is stronger than the current station, it switches over to that frequency for
very short time. (When AF flashes on LCD, it will search for the stronger RDS station.)
Segment off: AF switching mode off.
Segment on: AF switching mode on, and receive RDS information.
Segment flashing: AF switching mode on, but RDS information is not received yet.
FM2
- Traffic alarm (TA)
In the TA standby mode, when a traffic announcement broadcast starts, the traffic announcement
broadcast is received as top priority regardless of the function mode so you can listen to it.
If you select TA mode off, while a traffic announcement broadcast is being received, the traffic
or
announcement broadcast reception is cancelled and the unit goes into the TA standby mode.
or to
Note: there is no TA function in DAB mode.
- TA SEEK/ TA ALARM
TA SEEK:
When newly tuned station does not receive TP information for 5 seconds, the radio retunes to next
station which doesn't have the same station (PI) as the last station, but has the TP information.
When TP information gets lost at the current station for retune time which is set by RETUNE S
or RETUNE L, the radio starts to retune to next same PI station. When PI station does not catch
in one cyclic search, the radio retunes to next station with TP information.
Note: In TA SEEK mode, the current station can be changed to the completely different station
because the unit searches TP station when the field (signal) strength of the current station is
very weak, or the current station has no "TP" signal. (The higher priority is TP rather than PI.)
or button.
TA (ON/OFF)
PTY (ON/OFF) SYNC (ON/OFF)
GB - 6
TA-V REG (ON/