Start-Up - Zonair3D Pure Airbox Manual De Usuario

Start-up

CONNECTION OF PURE AIRBOX
Before connecting the equipment, check that no component is missing.
1. Locate a power supply for
connection to the Pure Airbox.
Plug the equipment to the
power suply using the power
cord.
4. After having checked its
operation, it is advisable to set
the regulator to its maximum
speed (Hi) for the first 10
minutes to execute a deep
cleaning of the room.
SWITCHING OFF PURE AIRBOX
After use, press the on-off button and disconnect from the power supply.
Position the equipment in a clean and dry space.
22 Pure Airbox
2. Wait about 10 seconds
until the display performs the
function test. When it remains
in WAIT, press the button "ON".
It takes about 6 seconds to start
the engine.
5. Then, it is then recommended
to leave it at medium speed,
below 50, to maintain optimal
recirculation and comfort speed.
3. Then press and hold the upload
button speed " " a few seconds
until it reaches the value 50 and
check its operation for a few
seconds.