Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION: Ensure the Temperature Dial is set to "OFF," the Power Cord is unplugged from
the electrical outlet, and the product has thoroughly cooled before attaching or
detaching the Handle.
To Attach:
1.
Align the electrical pins of the Base with the electrical pinholes of the Handle.
**Ensure the Locking Lever is in the raised/vertical position**
2.
Slide the Handle until it locks into position on the Base.
3.
Push down the Locking Lever so it securely locks into the tab recess.
4.
The handle should be secure and not fall off. If the handle is loose, then the locking
lever was not properly engaged. Return to step-1 and repeats steps 1-3.
To Detach:
1.
Slightly push the Locking Lever tab away from the tab recess.
2.
Push the Locking Lever to its raised/vertical position.
3.
Remove the Handle from the Base.
NOTE: Do not twist or bend the Handle when removing it from the Base, as product
damage may result.
4.
Push down the Locking Lever so it securely locks into the tab recess, for proper
storage.
HOW TO USE YOUR
SKILLET
NOTE: Thoroughly clean the product before using it for the first time.
CAUTION: Do not touch hot surfaces. Always use the Handle and knobs of the product
when handling. Use protective oven mitts or gloves to avoid burns or serious personal
injury.
1.
Place the product on a flat, stable, heat-resistant surface.
2.
Ensure the product is unplugged from the electrical outlet and the Temperature Dial
is in the "OFF" position.
3.
Follow the "To attach/detach the Handle" procedure to
attach the Handle.
4.
Lightly coat the entire cooking surface with cooking oil of
choice. Repeat as necessary.
5.
Plug the Power Cord into a standard 120V AC electrical outlet.
6.
Preheat the skillet uncovered for about 30-45 seconds using
the "MAX" setting.
7.
Place the ingredients or food to be prepared into the skillet.
8.
Set the Temperature Dial to the desired cooking temperature
and cook the food or ingredients until done.
NOTE: The optimal cooking temperature level for this product is
the 1/3 point to 2/3 point on dial (see Figure 1). High cooking
temperature levels may cause discoloration or shorten the life
of the non-stick surface.
9.
Once cooking is complete, set the Temperature Dial to the "OFF" position and
unplug the Power Cord from the electrical outlet.
www.maxi-matic.com
4
info@maxi-matic.com
Figure 1
Publicidad
Tabla de contenido
