Electrical Information - NUTOOL MP900N Manual Del Usuario

GB

ELECTRICAL INFORMATION

Connection of the mains plug
Important!
The wires in the mains lead fitted to this product are coloured in accordance with the following code:
THIS PRODUCT IS DOUBLE INSULATED AND THEREFORE DOES NOT REQUIRE A CONNECTION TO EARTH.
THE 3 PIN PLUG MUST COMPLY TO BS1363/A.
FUSE MUST COMPLY TO BS1362
If for any reason the 13 amp plug fitted to this product requires replacement it must be wired in accordance with the
following instruction:
DO NOT CONNECT THE BROWN LIVE OR BLUE NEUTRAL TO THE EARTH PIN MARKED 'E'
Connect the Blue wire to the terminal marked Neutral (N). Connect the Brown wire to the terminal marked Live (L).
Ensure that the outer insulation is gripped by the cord grip and that the wires are not trapped when replacing the plug cover.
The mains lead on this product is fitted with a 13 amp (BS1363/A) plug. A 13 amp (BS1362) fuse must be fitted in the plug.
IF IN DOUBT CONSULT A QUALIFIED ELECTRICIAN
There are no user serviceable parts inside this product except those referred to in the manual. Always refer servicing to qualified
service personnel. Never remove any part of the casing unless qualified to do so; this unit contains dangerous voltages.
WARNING!
For your protection if this product is to be used outdoors it should not be exposed to rain or used in damp locations.
Do not place the product on damp surfaces, use a workbench if available. For added protection use a suitable
residual current device (R.C.D.) at the socket outlet.
If the mains cable requires replacing it must be replaced with an identical one and fitted by a qualified person.
Brown: Live (L) or Red
Blue: Neutral (N) or Black
12
ON THE 3 PIN PLUG