Publicidad
STEP 3
NOTE: ASSEMBLY SHOWN FOR 97 IN. OPENING HEIGHT. The following assembly
should be modified based on your opening height, SEE CHART ON PAGE 4.
1. Place a wedge (K) (tapered or rounded end up) on a long tapered tube (C) approximately
half way down.
2. Slide deep shelf (J) down the tube and fit over the wedge (K).
3. Place another wedge (K) (tapered or rounded end up) on a long tapered tube (C) and
slide the soap tray (I) down the tube and fit over the wedge (K).
4. Repeat this step for the medium tapered tube (D) and the other shelves (J). NOTE: Shelves
can be adjusted by moving the wedges (K) up or down.
C
I
K
J
K
1-800-892-3986
IS02176-I
Pg 5 of 20
Publicidad
