Planer Safety Rules; Product Description And Specifications; Intended Use; Product Features - Berner BP 40-82 C Manual Original

OBJ_BUCH-1135-002.book Page 13 Wednesday, August 12, 2015 3:00 PM
 Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions
and the work to be performed. Use of the pow-
er tool for operations different from those intend-
ed could result in a hazardous situation.
Service
 Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the pow-
er tool is maintained.

Planer Safety Rules

 Wait for the cutter to stop before setting the
tool down. An exposed rotating cutter may en-
gage the surface leading to possible loss of con-
trol and serious injury.
 Hold the power tool by insulated gripping sur-
faces only, because the cutter may contact its
own cord. Cutting a "live" wire may make ex-
posed metal parts of the power tool "live" and
could give the operator an electric shock.
 Use clamps or another practical way to secure
and support the workpiece to a stable plat-
form. Holding the work by your hand or against
the body leaves it unstable and may lead to loss
of control.
 Use suitable detectors to determine if utility
lines are hidden in the work area or call the lo-
cal utility company for assistance. Contact with
electric lines can lead to fire and electric shock.
Damaging a gas line can lead to explosion. Pen-
etrating a water line causes property damage or
may cause an electric shock.
 Do not reach into the chip ejector with your
hands. They could be injured by rotating parts.
 Apply the machine to the workpiece only when
switched on. Otherwise there is danger of kick-
back when the cutting tool jams in the work-
piece.
 When working, always hold the planer in such
a manner that the planer base plate faces flat
on the workpiece. Otherwise the planer can be-
come wedged and lead to injuries.
 Never plane over metal objects, nails or
screws. The planer blade and the blade shaft
can become damaged and lead to increased vi-
brations.
 Products sold in GB only: Your product is fitted
with a BS 1363/A approved electric plug with in-
ternal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fitted
in its place by an authorised customer service
agent. The replacement plug should have the
same fuse rating as the original plug.
1 609 92A 1DH • 12.8.15
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.
Product Description and
Specifications
Read all safety warnings and all in-
structions. Failure to follow the warn-
ings and instructions may result in
electric shock, fire and/or serious
injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.

Intended Use

The machine is intended for planing of firmly sup-
ported wooden materials, such as beams and
boards. It is also suitable for beveling edges and re-
bating.

Product Features

The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Depth adjustment knob (insulated gripping
surface)
2 Chip ejector (alternatively right/left)
3 Storage compartment for planer blade/
Allen key
4 Planing depth scale
5 Lock-off button for On/Off switch
6 On/Off switch
7 Belt cover
8 Screw for belt cover
9 Chip ejection selector lever
10 Planer base plate
11 V-grooves
12 Handle (insulated gripping surface)
13 Blade drum
14 Clamping element for blade
15 Fastening screw for planer blade
16 Carbide blade (TC)
17 Lateral blade-shaft protector
18 Hex key
19 Extraction hose (Ø 35 mm)*
20 Chip/dust bag*
21 Parallel guide*
English | 13