Preparation For Use; Power Connection - Denver CRB-618 Instrucciones De Uso

PREPARATION FOR USE

AC-DC adaptor connection : The clock radio unit can be powered by an external
AC-DC adaptor, required the output DC 5V 1.5A (included).

Power connection

Plug the AC-DC adaptor to a household outlet AC source, connect the adaptor's
DC output plug to the DC IN Jack of the clock unit. This unit is equipped
with a battery back up system; it requires a 3V flat lithium battery "CR2032"
(not included). Insert the battery in the battery compartment, making certain
that the positive and negative (+and-) battery terminals are attached to the
corresponding terminals on the plate in the battery compartment. If an AC power
failure occurs, the clock automatically switches to the battery power supply, the
clock and timer memory continue running. When the AC power resumes, the
clock switches back to AC again.
Time manual setting
With the radio off mode, press and hold the MEMORY/ CLK.ADJ. button (8) ;
"24 Hr" will blink. Press the SKIP FORWARD(5) or SKIP BACK(4) button to set
the unit to the 12 hour (12 Hr) mode or 24 Hour (24 Hr) mode.
Press the MEMORY/ CLK.ADJ. button (8) and the hours will blink.
Press the SKIP FORWARD(5) or SKIP BACK(4) button to set the current hour,
then press the MEMORY/ CLK.ADJ. (8) button again; the minute digits will
blink. Press the SKIP FORWARD(5) or SKIP BACK(4) button to set the current
minutes.
When done and you press MEMORY/ CLK.ADJ. (8) button once again to
indicate the current time is set.
Setting Alarm Time
To preview the alarm time. Press the ALARM button (6/7) once.
While the display is showing the alarm time and you hold the ALARM button for
3 seconds and the hours will blink.
Press the SKIP FORWARD(5) or SKIP BACK(4) button to set the alarm hour.
Press the ALARM button again; the minute digits will blink. Press the SKIP
FORWARD(5) or SKIP BACK(4) button to set the alarm minutes.
Press the ALARM button and you can change the sound mode (Buzzer, Radio)
for the alarm.
To delay the alarm, press SNOOZE. It will come on again in approx. 9 minutes.
You may repeat this cycle several times during the alarm cycle. To stop the
alarm, press ALARM OFF (9) button .
To stop the alarm from coming on the following day, hold the ALARM button to
turn it off. The alarm icon will disappear to indicate the alarm is disarmed.