Operation - Beurer ELLE HDE 30 Instrucciones Para El Uso

6

Operation

Important
• Do not jam the mains cable [8] e.g. in a
drawer or door.
• Straighten the mains cable [8] if it becomes
twisted.
• Do not pull, twist or kink the mains cable
[8]; do not pull or lay it across/on sharp,
pointy objects or hot surfaces.
Warning
• Stand on a dry, electrically non-conductive
surface.
• Ensure that your hands are dry!
• Dry your hair beforehand with a towel.
• Depending on the switch setting and
duration of use, the volume diffuser [1],
professional nozzle [9] and hair dryer can
become very hot – burn and fire hazard!
• Do not touch the volume diffuser [1] and
the professional nozzle [9].
• Let the volume diffuser [1] and professional
nozzle [9] cool down first before you
remove them.
• Place the hair dryer only on a
non-combustible surface.
• Ensure that there are no highly flammable
liquids in the vicinity of the unit.
• Do not use the unit on artificial hair
– fire hazard!
• Ensure that no hair can be directly
sucked in.
14
Note
After switching on the unit for the first time, a
light odour develops for the first minutes. This
is normal and not hazardous to your health.
Let the unit run for three to five minutes. Then
you can use the unit normally.
• If the unit becomes overheated, it switches
off automatically for your safety.
• Remove the plug from the socket and let
the unit cool down.
• Before switching the unit on again, check
the air outlet [2] and the filter [3] for
blockage (e.g. sucked-in lint, dust, hair).
• Switch on the travel hair dryer via the slide
switch [6.1]:
Strong airflow
Gentle airflow
• Select the heat level:
High temperature
Medium temperature
Low temperature
• Dry and/or style your hair as you wish.
After each use/interruption, always set the
hair dryer slide switch [6.1] to off
(position 0).