Faber FBH 64 BK Manual De Uso página 16

Models: FBH 84 BK / FCH 84 GR / FBH 83 BK / FCH 83 GR / FBH 32 BK / FCH 63 GR
Error code Description
C The cooking zone can be configured.
The cooking zone will be configured.
C/-
If „-„ is not displayed check the possible
causes of the E/5.
A flashing „E" on each cooking zone indicates
E
that all configs will be deleted.
E/2
(error code different Temperature limits are exceeded.
for some UI)
E/3 Unsuitable pot
E/4 Unconfigured induction module
No communication between UI and induction
E/5
module
E/6 Main power disturbance
E/7
E/8 Fan failure
E/9 Defect ive temperature probe on inductor
E/A
Hardware defect of induction module
E/C Configuration failure
E/H Fixed sensor value
No functionality and
Overvoltage on the switch mode power supply
no displaying
(no functionality)
16
Remedy
Contact authorized center for technical assistance
specifying the error code.
Contact authorized center for technical assistance
specifying the error code.
Contact authorized center for technical assistance
specifying the error code.
System must cool down.
Change the pot / pan; if the error persists, contact
authorized center for technical assistance specifying
the error code.
Contact authorized center for technical assistance
specifying the error code.
Contact authorized center for technical assistance
specifying the error code.
Contact authorized center for technical assistance
specifying the error code.
Contact authorized center for technical assistance
specifying the error code.
Contact authorized center for technical assistance
specifying the error code.tecnica e indicare il codice
di errore.
Contact authorized center for technical assistance
specifying the error code.
Contact authorized center for technical assistance
specifying the error code.
Contact authorized center for technical assistance
specifying the error code.
Allow system to cool.
Disconnect and connect the power line connection;
if the error persists, contact authorized center for
technical assistance specifying the error code.