Connecting With A Bluetooth Device - ION Party On Guia Del Usuario

Features
1. Power – Press this button to power Party On on and off.
The power button LED shows the state of the Bluetooth
connection. See the Party On LED activity box for more
details.
Note: Party On will turn itself off after 5 minutes of no
audio playing through either Bluetooth or the aux input.
To continue to use Party On, power on the unit by
pressing the power button. If the Party Light switch is
set to ON, the unit will turn off after 15 minutes (if music
is not playing).
2. Volume Down/Up Controls – Press these buttons to
decrease or increase the volume level for the aux input
and Bluetooth sources. Party On defaults to 2/3 volume
when it is turned on. Please adjust the volume using
your device's volume controls and Party On's volume
buttons.
3. Next Track – Press this button to advance to the next
track when listening to Bluetooth sources.
Note: In some apps, pressing the Next button may
advance to the next playlist or music genre.
4. Party Light Switch – Adjust this switch to turn the lights
on and off, or to put Party On into Demo Mode.
When in Demo Mode, pressing the power button:
•
powers on the unit (both lights and speaker)
•
powers on the unit indefinitely when there is a Bluetooth connection, and music is playing
•
powers off a Bluetooth connected unit after 2 minutes if there is no music playing
•
powers off the unit after 2 minutes if there is no Bluetooth connection
5. Bluetooth Disconnect – Press this button to disconnect from a previously paired Bluetooth device,
and put Party On back into pairing mode.
6. Battery Charging LED – This shows the charge status. When charging, it will be on, when fully
charged or not plugged into a charge cable, it will be off.
7. Micro-USB Charging Port – Connect the included micro-USB cable to connect Party On to a USB
power adapter connected to a power outlet or to your computer.
8. Aux Input – Connect the output of an MP3 player or other audio source to this input.

Connecting with a Bluetooth Device

1.
Power on Party On.
2.
Turn on your Bluetooth device.
3.
Navigate to your Bluetooth device's setup screen, find "Party On" and connect.
Note: If your Bluetooth device prompts for a pairing code, enter '0000'.
4.
Play music and adjust Party On's volume buttons.
Note: If you experience trouble connecting or playing music, update your device's OS.
5.
To disconnect a connected Bluetooth device, press the Disconnect button.
Troubleshooting
If the sound is distorted: Try lowering the volume control of your sound source. Also, try to reduce the
overall volume of Party On.
If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass
level. This will allow you to play the music louder before clipping (distortion) occurs.
1 2 3
Power Button LED activity:
Solid Red LED = No Bluetooth
connection.
Solid
connected.
Blinking Red LED = Battery is low
and needs to be recharged (no
Bluetooth connection).
Blinking
Battery is low and needs to be
recharged (Bluetooth connected).
3
5
8
Blue LED = Bluetooth
Blue/Purple LED
4
6
7
=