English - Bkool Smart Bike Manual De Instrucciones

English

ASSEMBLING THE BIKE
1
SIMULATOR AND CONTROL
2
START-UP
3
YOUR FIRST RIDE
4
WHAT TO DO IF...
5
SAFETY WARNINGS
6
WARRANTY
7
Thank you for purchasing a Bkool bicycle. We want your experience with it to be perfect and for
you to be part of the extensive Bkool community.
14
1
15
16
17
18
18
19
20
Assembling the bike
See the illustrations on pages 5 to 11.
Screw each stabilizer bar to either end of the base. Use four of the
1
M8x20 screws (19019) for each bar and tighten with the hex key
(19315).
Thread the pedals onto the spindles. Use the fixed wrench (19316) for
2
this. Make sure you attach the L pedal on the left and the R pedal on
the right (these markings are shown on the inner side of the pedal)
facing forward. Tighten them keeping the direction of rotation in mind.
Insert the seat post in the stand. You can adjust the seat height by
3
raising or lowering the post. Use the knob on the stand to lock it in
place. You can also move the seat forward or back using a no. 14
wrench (not included)
Insert the handlebar stem in the stand. You can adjust the handlebar
4
height by raising or lowering the stem. Use the knob on the stand to
lock it in place. Use the handlebar knob to lock it in place.
Insert the handlebar in the horizontal part of the handlebar stem.
You can move the handlebar forward or backward.
Lastly, tighten screw 1375, shown in Figure 4.5
Lean the bike in order to carry it with the wheels.
5
Plug the AC transformer into the connector located at the right rear of
6
the central bar on the stand.
Place the smartphone stand wherever you like on the handlebar.
7
15