Preparing To Work; Inserting The Filter - Collection Bag - Fimar FA15+ Manual De Uso Y Mantenimiento

PREPARING TO WORK

Before beginning to work, it is necessary to:
1. Before using, the appliance must be in order and safe to use
with the work equipment, especially the power cable and the
extension cable. If everything is not in order, the appliance must
not be used.
2. Take all necessary steps to ensure that the device is in a safe
condition (read the section "APPLIANCE SAFETY
3. Insert the vacuum hose (1) from the vacuum nozzle (2) on the
collection tank, before pulling the vacuum hose press the button
(3) for unlocking the catch.
4. If not present in the appliance, insert a new filter - new collection
bag (read the section "INSERTING THE FILTER - COLLECTION
BAG").
2
1
INSERTING THE FILTER – COLLECTION BAG
To insert the filter – collection bag inside the collection tank, proceed
as follows:
1. Do what is required to make sure the appliance is in a safe
condition (read the section "APPLIANCE
2. Raise the vacuum tank (1) lid using the handle (2) on the front of
the collection tank, turn the handle clockwise.
3. Using the handle (3), in the vacuum tank lid, remove the vacuum
tank lid from the collection tank (rotating it and shifting it as
indicated in the figure). Put the vacuum tank lid gently on the floor.
4. Insert the filter - paper collection bag inside the collection tank,
taking care to insert the filter correctly into the vacuum nozzle
(4) inside the collection tank and making sure not to damage the
cardboard support (5) in the bag itself.
1
2
1
PREPARING TO WORK
").
3
SAFETY").
3
2
5. Select the most suitable accessory for the task at hand (read the
section "CHOOSING AND USING THE
6. Insert the selected accessory into the vacuum hose.
7. If not present in the appliance connect the power cable (read the
section "CONNECTING THE POWER
ATTENTION: never use the appliance without the filters
supplied with the machine (COLLECTION BAG-FILTER; AIR
INTAKE FILTER; EXHAUST AIR FILTER).
5. Using the handle (3), on the vacuum tank lid, position the vacuum
tank lid on the collection tank. Being very careful to insert the
fixing pin (6) in the collection tank inside the fixing slit (7) in the
vacuum tank lid.
5
4
3
26
ACCESSORY").
CABLE").
7
6
4