Uline H-4565 Manual De Instrucciones

H-4565
MONARCH 1136
TWO LINE LABEL GUN
CHANGING THE INK ROLLER
1. Pull the latches back and swing the cover open
completely. You should hear a click.
NOTE: Do not force the cover past the click
position.
Figure 1
Figure 2
SETTING PRINT CHARACTERS
1. For the first line, use the character key on the top
of the gun to find the alpha/numeric character
conversion.
NOTE: See character key on page 3.
PAGE 1 OF 9
1-800-295-5510
uline.com
INSTRUCTIONS
2. Hold the labeler sideways
over a trash can while
pushing the button to
release the ink roller.
(See Figure 1)
3. Hold the new ink roller by
the stem. (See Figure 2)
Slide it onto the post,
snapping it into place.
(See Figure 2)
4. `Close the cover
completely.
2. Pull/push the knob until the indicators are on the
desired band. (See Figure 3)
3. Turn the knob until the desired character appears
between the indicators. To print a blank, select the
blank space for that band. (See Figure 3)
Figure 3
6 1 Y E L L O W
4. Repeat steps 2-3 for each band.
5. Fully push in the knob when you are done.
6. Repeat steps 2-5 for second line.
LOADING LABELS
1. Pull the latches back and
Figure 4
2. Before loading a new roll of labels, tear off and
discard the first 10 inches of label and liner.
3. Then, to prevent jamming, peel the first 12 labels
from liner and discard.
Para Español, vea páginas 4-6.
Pour le français, consulter les pages 7-9.
swing the cover open
completely. You should hear
a click. (See Figure 4)
NOTE: Do not force
the cover past the
click position.
0421 IH-4565